Solar Push I

Manual

Rems Solar Push I

RRP: £674.95

Price: £539.95 (Including VAT @ 17.5%)

Quantity:

Voltage Option 240v110v

Hose Option PVC Hose £539.95 EPDM Hose £619.95

Rems Solar Push I

* Special Offer *

Save Over £95 off RRP

Flush, fill and vent in one operation.

The Rems Solar Push I is a heavy duty electric filling and flushing machine for fast and easy filling, flushing and venting of closed systems. Its high volume pump has a capacity of 30 litres per minute and it is the ideal tool for solar systems and pumping liquids including heat transfer liquids, frost protection liquids, water, aqueous solutions and emulsions.

Supply Format

This unit is supplied with the Rems Solar Push I complete with impeller pump, 370w motor in either 240v or 110v and a choice of either ½" PVC woven hose (3 metre) or ½" EPDM woven hose (3 metre).

Specification

The Solar Push I has a 30 litre tank capacity which along with its impeller pump gives this unit a pumping capacity of 30 litres per minute.

Pumping pressure maximum 4 bar/0.4 MPa/58psi.

Pumping capacity at 40m vertical pumping is 10 litres per minute.

Suitable for constant use up to 80°C.

Pressure release valve.

Unit

Heavy duty 370 watt quiet running motor with thermal cut out in either 240v or 110v.

Dry self priming impeller pump with impeller manufactured from NBR.

For constant use up to 80°.

Choice of Hose type

PVC woven hose ½" x 3m with ¾" pressed connection either end suitable for temperatures up to 60°C.

EPDM woven hose ½" x 3m with ¾" pressed connection either end suitable for temperatures up to 170°C.

Features

Presure release valve.

Strong two wheel tubular stand for easy on site transport.

Built in hose holder.

Light and portable.

30 litre liquid container with large aperture opening for easy filling. Level indicator for easy operation and container is easily removable for cleaning.

Flow return valve with immersion tube prevents liquid entering the container from foaming.

Heavy duty, temperature resistant hose between container and pump.

Stopcock at the base of the plastic container allows for easy cleaning and rapid changing of the plastic container when using a variety of liquids.

Easy view filter with fine mesh filter helps to recognise air in the system and helps to remove loose deposits such as solder and chippings.